When I go to the "internal" router's management interface it shows as having the same WAN, gateway, and DNS addresses that the RG uses. I set my "internal" router to use DHCP for the WAN address, plugged it's WAN port in to the RG, reboot the "internal" router, let the RG assign a local address to the "internal" router and then set that address to the DMZ in the RG's management interface.
This is what I did to use an "internal" router. The input to the Linksys must be the WAN, not the WAP port and follow the following directions from Computer Joe: So before I even consider that, I just want to make sure a 3rd party WAP/ethernet will support interenet with a uverse box attached playing video simultaneouly.
My linksys router plus#
I just can't justify paying that, plus the guy didn't really seem like he understood my explanation of whats wrong. The guy had to ask his supervisor, then came back and said they could help me fix it for 49.99. I called att and they put me through to Connect Tech, and I brieftly explained my issue. (considereing the router they gave me doesn't even support gigabit 🙂 ) Unless the RG router and box have some weird thing were they need a dedicated line and thats why the interenet won't work?!
My linksys router full#
But I just assumed the att box gets assigned an ip address even going through the swtich and wouldn't need the bandwidtch of a full cat 5e line. The thing is, even when I don't even have the AP (for the wireless box) powered on at all, and the wireless ATT box is hardwired to the linksys WAP swtich, it still kills the internet at the switch, both wired or wireless (TV works fine). Thank you for the response, and that is good to know. Again I'm not that tech savy, so bear with me. I have seen some configuration like using the RG just as a modem and then I can set up two routers to do what I'm looking for or setting the liksys up in a different IP such as 192.168.2.x, but I rather not do either of those. I just don't understand why when the box is connected to it and the uverse is turned on and being watched the internet instantly cuts out. I guess the question is, has anyone experienced this or have an idea of a way I can combat this problem? I'm almost certain I set the linksys up correctly to act as a wireless access point. Regardless, the internet always works when connected to the RG router, even when the linksys internet stops working. The moment I turn the box off connected to the linkysys router, the interent starts working again on the linksys router. The internet still works when the box is attached, but when I turn the UVersse box on and watch tv, it prevents all internter (hardwired and wireless) on the linksys router. The problem comes in when I hardwire my or attach the supplied WAP wireless box adapter to the linksys access point. My linksys router on the other side of the house works perfect for internet on wireless/lan connections. Both routers are set to the same SSID and PW for easy roaming. On the linksys I have turned off DCHP, NAT, and firewall, assuming the RG will handle that. The linksys router was neceassray because part of my house doesn't get reception from the RG router. I have set up the linkysys router so that it is hard wired to the the RG ATT router, and acts as a WAP. I'm not the most tech savy person around, but can sometimes figure things out, so any help is appreciated.
Okay, so Ill start by saying hi, and this is my first time posting here.
0 kommentar(er)
